MC9 MAGAZINE SLEEVE - for CANIK MC9 with 18 ROUND CANIK/MEC-GAR MAGAZINE

**NEW TEXTURED DESIGN, KNURLING ON REAR OF SLEEVE TO IMPROVE GRIP! We switched the design to be knurled, and less costly because these are now printed using the FDM (Fused Deposition Modeling) method vs. the SLS method we used to use.**
**FREE SHIPPING OVER $80 total order value***
 
** INCLUDES MAGAZINE SLEEVE ONLY***
** DESIGNED for MC9 with MED or LARGE BACKSTRAP, also will function with TP9 Elite SC.*** 
** DOES NOT WORK IF YOU HAVE A TAYLOR FREELANCE BACKSTRAP ON YOUR MC9 *
*** Designed for standard Mec-Gar Canik 18 round magazine with black factory baseplate (P/N MA548 or MA2240), THIS ONE: TP9 Series 18 rd. Magazine, 9mm (canikusa.com) ***
***Also fits on Canik Rival Magazines and TP9 20rd mags (P/N MA550)***
 
Shooting without sleeves on your longer mags isn't fun. This sleeve fills the space in your hand when using a factory standard MEC-GAR/CANIK 18 round magazine in your MC9. Vastly improves grip comfort and accuracy because you can get a full hand grip on the pistol. The knurling grabs your hand for a very firm and consistent grip. Installs so easily a caveman could do it. Fits snugly on the metal magazine tube to prevent sliding. One-piece 3D printed construction. The material is tough, durable, and attractive! Sleeve included. No magazine or other parts included. 
 
Also works and functions with the TP9 Elite SC, but the sleeve will be slightly thinner than the grip because this sleeve is designed for the MC9. 
 
Install:
1. Slide the sleeve down over your 18 round Canik Magazine until it touches the factory plastic baseplate. 
 
MATERIAL: 3D Printed PLA PRO, BLACK or FDE COLOR
This is a 3D printed part with layer lines and it may not be perfect aesthetically. These are printed by high quality Bambu Labs FDM machines, which produce very good prints. Although unlikely, the sleeve may crack or break under high stress or repeated drops onto hard surfaces, but this should not affect the function of the firearm. The sleeve should not be left in a hot car or other area where temperature exceeds 125 degrees Fahrenheit, or exposed to direct sunlight for long periods of time. HurleyWelding assumes no liability for the use of any of our products on your pistol(s).