MC9 MAGAZINE BASEPLATE - For CANIK 15 OR 12 ROUND MAG with FACTORY BACKSTRAP

**IMPROVED! CAN BE USED WITH EITHER 15 ROUND or 12 ROUND CANIK MAGAZINES! Designed for the MC9 but also works with TP9 Elite SC.**
**BLACK IS THE ONLY AVAILABLE COLOR, ​​SPRAY PAINT TO MATCH YOUR GUN IF YOU WISH.**
 
**FREE SHIPPING OVER $80 total order value***
**INCLUDES MAGAZINE BASEPLATE KIT ONLY, NO MAGAZINE OR FIREARM IS INCLUDED**
**THIS FITS THE CANIK METE MC9 FACTORY MEDIUM and LARGE BACKSTRAPS**
**NOT GUARANTEED TO WORK WITH AFTERMARKET MAGAZINES NOT MADE BY MEC-GAR, OR ANY AFTERMARKET BACKSTRAPS**
 
DESIGN UPDATES:
1. Added features for the same baseplate to be used as a +0 capacity on the 15 RD mag, or used as a +2 capacity on the 12 RD mag. You can install this baseplate on either magazine and the fit and feel on the gun will be the same. Reliability / durability is probably better when used on the 15 RD magazine but either work great and locks back the slide on last round.
2. Added pinky hook to improve grip retention and ergonomics. 
3. Made steel pin holes blind so you can't see the pins from the outside, they are invisible vs. prior design revisions
4. Added larger diameter steel pins for a stronger connection between halves.
 
WHY DO YOU NEED THIS PRODUCT?
The Canik MC9 is sure to become one of the top contenders among the best concealed carry pistols, but the back of the stock 15 or 12 round magazines dig into your hand while shooting, and look weird. Improve your shooting grip, accuracy, and draw time with this custom baseplate that fits the MC9 15 or 12 round magazine(s)! Vastly superior in comfort over the factory grip with no hot spots. This product also improves draw time because you can get a full hand on the grip without fumbling around for the small grip on the MC9. Great for practice or carry.
This product is designed for the CANIK METE MC9, but will also fit and function with the TP9 Elite SC (Sub-Compact), although the baseplate will be slightly thinner than the SC grip. We also have "SC" specific baseplates!
 
SPECS:
Material: Nylon 12 plastic, 3D printed
Screw: Black Oxide Stainless Steel
Color: Black
Assembly to your existing magazine tube is simple and instructions are on this website.
Remove your factory baseplate and install this one using only a small Allen wrench and a Phillips screwdriver. Steel spring pins are provided to locate the two halves together. 
 
NOTE on durability:
This is a new 3D printed product, and durability under a wide range of conditions is still pending. Some people baby their mags, and some people treat them like a hammer. I have gone through multiple design revisions to strengthen weak areas of the baseplate, and  tested these products myself by dropping loaded and unloaded magazines out of the gun repeatedly onto standard outdoor surfaces from shoulder height, with no issue. Surfaces like gravel, hard dirt, grass, sticks, your mom's basement carpet, etc. should not cause a problem with durability, function, or cracking. If you throw this magazine onto concrete or abuse it, the plastic might break but I have not tried this yet. Bottom line is try not to abuse it on concrete or boulders. Normal use cases should be fine. The baseplate will likely be more durable against drops when mounted on the 15rd magazine as opposed to the 12 rd magazine, but time will tell. 
 
Nylon 12 is by far the cheapest available option to 3D print these parts. Additional options may be available in the future. Your input and feedback is appreciated.