INSTALLATION/ASSEMBLY OF MC9 SLEEVE ONTO 18 ROUND MAGAZINE.

1. Remove all ammo from magazine if desired. You will need a 3/32 allen wrench to tighten the set screw. 

2. Verify that you have the standard plastic flush Canik baseplate on your 18 round magazine. 

3. Slide the sleeve down the magazine until it touches the baseplate. 

4. Use the 3/32 allen wrench to lightly tighten the set screw until the sleeve can no longer move up and down the magazine tube. Make sure that the sleeve stays in contact with the factory plastic baseplate during tightening.

5.  Verify function by loading the magazine with ammo fully to make sure no binding occurs.  

6. DONE! Go shoot and enjoy your new sleeve! It should not require any maintenance.

_______________________________________________________________

DISSASSEMBLY:

1. Remove the set screw and slide the sleeve up and off of the magazine.

​

​